PRODUCTS – INCUBATOR

VITALIFE® BB-300 LUXURIOUS

INCUBATOR

Infant Incubators Series BB-300

VITALIFE® BB-200 TOPGRADE

INCUBATOR

OPTIONAL PARTS

DOUBLE WALL HOOD

UPSIDE LED PHOTOTHERAPY

DOWNSIDE LED PHOTOTHERAPY

X RAY CASSETTE & INTEGRATED SCALE

AIR/OXYGEN BLENDER

ELECTRONIC ELEVATOR

Functions

  • Microprocessor based servo controlled temperature system.
  • Air temperature and skin temperature control modes.
  • Humidity control system
  • Nominal temperature, air temperature, baby skin temperature, timer and heating power are shown separately on the LED display.
  • Self-check function, multiple audible and visual alarms.
  • Triple over temperature protection with separate cutting device plus safety system.
  • Set function 37 ° C.
  • Adjustable inclination of the baby bed.
  • Single wall hood, 4 operating windows and port iris, independent locking device for the front door.
  • RS232 connector, oxygen inlet.
  • Cassette for x-ray.
  • Optional: Baby weighing system.
  • Adjustable electric height.

FUNCTION FEATURES

  • Microprocessor based servo controlled temperature system.
  • Control modes: Air mode and baby skin mode.
  • Humidity control and oxygen concentration control system.
  • Humidity control by LCD.
  • Temperature control by LCD.
  • Oxygen control by LED.
  • Self-testing function, various failure alarms by audible and visual.
  • >37°C temperature set function.
  • Embedded integrated sensor module.
  • Triple protection for over temperature with separate cut off device, more safety system.
  • The inclination of infant bed is adjustable.
  • Double wall hood, 4 operating windows and 2 iris ports.
  • Independent locking device for front door.
  • RS232 connector, Oxygen inlet.

Technical Data

  • Power supply : 110/220V  60/50Hz.
  • Power input :  650VA.

Operating Conditions

  • Environment temperature: 20°C~30°C.
  • Environment relative humidity: 30%~75%RH.
  • Environment air velocity of flow: <0.3m/s.
  • Air Temperature control range: 25°C~38°C.
  • Skin temperature control range: 32°C~38.5°C.
  • Humidity display range: 0% -100%RH.
  • Humidity control range: 40% -95%RH.
  • Oxygen concentration display range: 0% ~100% .
  • Oxygen concentration measure accuracy:  ± 2% (After calibration).
  • Oxygen concentration setting range: 20% ~60% .
  • Oxygen concentration control accuracy: ±4%.
  • Oxygen concentration deviation alarm: ±5%.
  • Skin temperature sensor accuracy: +0.3°C.
  • Temperature fluctuation: +0.5°C.
  • Uniformity of mattress temperature: ≤0.8°C.
  • Warm-up time: ≤45min.
  • Internal noise level: ≤55dB (A).
  • Infant bed tilt angle : +10º.
  • Mattress size: 65cm(L) x 37cm(W).
  • Trough capacity: 1200ml.
  • Air filter: 0.5um.

Main Characteristics

  • Temperature control and humidity control by LCD.
  • Double wall hood.
  • Trough for pulling and pushing ,which is convenient to add the water and wash.
  • Fan with low noise and long life-span.
  • Temperature deviation and over temperature could be amended in front panel directly.
  • A second thermal cut-out function for more safety.
  • The infant bed inclination angle is adjustable.
  • Six operating windows.two side access operating windows can be swiveled.
  • 4 drawers for easy storage.

Standard Configurations

  • Main body (including the Transparent hood, Control system, Infant bed,Water trough) , I.V.pole, Mattress, Drawers, Castors.

Optional Parts

  • Double Wall Hood
  • X Ray Cassette & Integrated scale.
  • Upside LED phototherapy unit BL-30D.
  • Downside LED phototherapy unit BL-100.
  • Air/Oxygen Blender.
  • Electronic Elevator.

Transport & Storage

Package

  • Each unit is packed in two wooden crate:
  • (control unit and cabinet): 112 x 66 x 99 cm.
    N. W.: 70 Kg G.W.:100 Kg.
  • Hood: 98 x 63 x 75 cm.
    N. W.:20 kg G.W.:30kg.

Transport and Storage

  • Environment Temp: -10°C- -+ 70°C
  • Environment Relative Humidity: ≤ 80%
  • Atmospheric Pressure: 500 ～ 1060hPa